1007 40th Ave North Moorhead, MN 56560
Seppi Mulchers Focal image

Seppi S7 Drago Mulcher with Chute for Biomass Collection

Mulcher with collection into trailer 60-120 HP

Mulches grass and prunings up to 7 cm [2.8”]

Would you like to gather the mulch in your orchard? This is the right dragon!

Universal powerful SEPPI M. flail mulcher S7 drago with a chute for collecting the mulching material.

The mulched material is taken up the chute and can then be collected and carted away in a trailer, leaving the soil clear of material. The SEPPI S7 drago mulches grass and prunings up to 7 cm [2.8”] from the floor for further use. Various materials, leaves and biodegradable waste can be mulched and collected. Helical distributed and high resistent SMO flails for universal use are for high cutting quality at uniformly distributed power. SEPPI S7 drago casing is very resistent, made of high-tensile steel S420. Counterknives inside the casing will give a perfect result when mulching. Support roller with double tapered roller bearings unit for a long life and the low maintenance costs. Adjustable large diameter roller positioned close to the rotor improves mulching on uneven ground and prevents scalping.

The optimum aerodynamics and airflow and high suction effect of SMO hammers offer a perfect ejection of mulched material by ejection chute into the collecting trailer. The S7 drago mulcher works at speed of 3-10 km/h.

The SEPPI S7 Drago collection mulcher can be used everywhere where the mulched material (grass, wood, leaves, biomass, cow dung, horse paddocks, etc.) should be removed from the surface.

Available working width: 150, 200 cm [59″, 79″].


  • Collection of material in orchards or vineyards
  • Clearing of site for replanting
  • Collection of biomass for composting
  • Environmental clearing in urban areas
  • Clearing of horse and cow dung


  • PTO drive shaft
  • 1000 rpm gearbox
  • Hyd. sweeper XAN with 3 vanes
  • Trailer 1,5 m3 [91,540 inch3]


  • S7 drago mulches grass and prunings up to 7 cm [2.8”]
  • Rotor with SMO flails
  • With chute for material collection into trailer
  • Hydraulically adjustable shute
  • Working speed 3-10 km/h
  • ISO 3-point rear linkage cat. 2 central fixed
  • Gearbox 540 rpm with freewheel
  • Input shaft 1 3/8” Z=6
  • Draw bar
  • Support roller
  • Front and rear protection: chains
  • Colour: red RAL 3020